1 Single-ended (RCA) per channel on each module.

1 Balanced (XLR) per channel on each module.

Input Impedance

50 Kohms. Single-Ended or Balanced, each phase, both modules.

Input sensitivity

Mono module:

Single-ended) 2.5V RMS input for 250W into 8 ohms.

Balanced) 1.25V RMS input for 250W into 8 ohms.

Stereo module:

Single-ended) 1.5V RMS input for 100W into 8 ohms.

Balanced) 0.75V RMS input for 100W into 8 ohms.

Gain

Mono Module:

(Single-Ended) 26dB (20x).

(Balanced) 32dB (40x).

Stereo Module:

(Single-Ended) 25.5dB (19x).

(Balanced) 31.5dB (38x).

Polarity

(Single-ended) Non-Inverting.

(Balanced) Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output.

1 balanced output per channel.

I / O RS232

1 DB9 and 1 RJ45 connector.

Modes/Processes

Standby, Stereo and Surround. Channels may be individually assigned to either buss.

Power Output

Mono Module:

(8 ohms-one channel driven) 250 W (rated) 325 W (typical)

(8 ohms-five channels driven) 250 W (rated) 245 W (typical)

(4 ohms-one channel driven) 450 W (rated) 475 W (typical)

(2 ohms-one channel driven) 550 W (rated) 675 W (typical)

(1 ohms-one channel driven) 720 W (typical)

Stereo module:

(8 ohms-one to ten channels driven) 100W (rated) 115W (typical)

<(4 ohms-one channel driven) 200W (rated) 210W (typical)

Frequency Response

(-3dB points @ full power) 0.3Hz - 250 kHz.

THD+Noise

Mono module: <1%

Stereo Module: <1.25% (both channels driven into 100W @ 8 ohms).

Signal to Noise Ratio

(unweighted) >100dB

Trigger Input

0V-12V steady state or pulse (1mS - 500mS.) Units are set at factory for steady state trigger.

Dimensions

17 5/8" W x 8 7/16" H x 23 1/2" D (448 x 214 x 597 mm) Regular front panel

18 15/16" W x 9 1/16" H x 23" D (481 x 230 x 584 mm) Rackmount front panel

Weight

98 Lbs. Stand alone (44.5 Kg)

111 Lbs. Boxed with accessories (50.4 Kg)

Maxumium Operating Temperature

Internal: 176° F (80° C)

Room: 122° F (50° C)