Amplifier
ADODB.Field
error '800a0bcd'Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record.
/thetadigital/msrp.asp, line 34 Failed to execute script: Http Status Code = 500
Info |
Specs |
Manual (PDF)
Gallery
Backplate Drawing
(click image to zoom)
Analog Audio Inputs
|
1 Single-ended RCA jack. 1 Balanced (XLR) jack. |
|
|
Input Impedance |
50KOhm. Single-Ended or Balanced, for each phase. |
|
Input sensitivity |
(Single-Ended) 2.8V RMS input for 300W into 8 ohms. (Balanced) 1.4V RMS input for 300W into 8 ohms. |
|
Gain |
(Single-Ended) 25dB (18x). (Balanced) 31dB (36x). |
|
Polarity |
(Single-Ended) Non-Inverting. (Balanced) Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output. |
Analog Audio Outputs
|
1 balanced output (Carda Type standard); optional second balanced output for bi-wiring. (Can be Cardas type or Reich type) |
|
|
I / O RS232 |
1 DB9 and 1 RJ45 connector. |
|
Modes/Processes |
Standby: Amplifier is muted and output bias is reduced to 10%. Thermal: Channel has overheated; amp automatically switches to Standby. |
|
Power Output |
(8 ohms) 300 W (rated) 350 W (typical) (4 ohms) 500 W (rated) 525 W (typical) |
|
Frequency Response |
(-3dB points @ full power) 0.5 Hz - 400 KHz. |
|
THD+Noise |
<1.75% |
|
Signal to Noise Ratio |
(unweighted) >105dB |
Miscellaneous
|
Power Requirements |
117 VAC, 10A Slo Blo main fuse, 230 VAC, 6A Slo Blo main fuse, 50-60 Hz. |
|
Power Consumption |
30W @ Standby; 53W @ idle; 525W @ full power into 8 Ohms; 925W @ 4 ohms. |
|
Trigger Input |
5-12 VDC Pulse between 1 and 500mS. |
|
Dimensions |
9 1/16" W x 13 7/8" H x 23 5/8" D (230 x 346 x 600 mm) |
|
Weight |
51 Lbs. Stand alone (19 Kg) 60 Lbs. Boxed with accessories (22.4 Kg) |
|
Maxumium Operating Temperature |
Internal: 176° F (80° C) Room: 131° F (55° C) |
Specifications subject to change without prior notice.