All contents copyright Theta Digital Corp.
  P r o d u c t s  
       
   

Digital A/V Controllers
     Casablanca III
     Six Shooter

Digital to Analog Converters
     Generation VIII

Power Amplifiers
  > Citadel
        General Information
     > Specifications
        Reviews
        Owners Manual
        Photo Gallery
     Enterprise
     Dreadnaught II
     Intrepid

 

 

Theta Dealer Locator page

 
   

Privacy Policy | Terms of Use
© Copyright Theta Digital Corporation.

 
Home Page Home Page Home Page Current Product Information Current Product Information Product Reviews Product Reviews Product Reviews Company and Product History Company and Product History Frequently Asked Questions Frequently Asked Questions Document Library and Press Area Document Library and Press Area Document Library and Press Area Email, Addresses, Dealers, Phone Numbers, etc. Email, Addresses, Dealers, Phone Numbers, etc.
 
  Specifications  
 
INPUTS: 
Analog Audio
    1 Single-ended RCA jack. 1 Balanced (XLR) jack.  
   

Input Impedance:

Input sensitivity:
 

Gain:
 

Polarity:

60K. Single-Ended or Balanced, each phase.

(Single-Ended) 3.1V RMS input for 400W into 8 ohms.
(Balanced) 1.55V RMS input for 400W into 8 ohms.

(Single-Ended) 25dB (18x).
(Balanced) 31dB (36x).

(Single-Ended) Non-Inverting.
(Balanced) Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output.

 
 
  
Digital Audio
   

TBA



 
 
OUPUTS: 
Analog Audio
    1 balanced output (Standard); optional second balanced output for bi-wiring.  
   

I/O RS232:

Modes/Processes:
 
 
 

Power Output:
 
 

Frequency Response:

THD+Noise:

Signal to Noise Ratio:

 

1 DB9 and 1 RJ45 connector.

Standby: Amplifier is muted and output bias is reduced
to 20%.
Thermal: Channel has overheated; amp automatically switches to Standby.

(8 ohms) 400 W (rated) 425 W (typical)
(4 ohms) 600 W (rated) 650 W (typical)
(2 ohms) 800 W (rated) 800 W (typical)

(-3dB points @ full power) 0.2 Hz - 400 KHz.

<2%

(unweighted) >103dB

 
 
 
Misc.
   

Power Requirements:
 
 
 
 

Power Consumption:
 
 

Standby Trigger Input:

Dimensions:
 

Weight:
 

Max. Operating Temp.:

117 VAC, 15A Slo Blo fuse for analog,
1A Slo blo fuse for digital;
230 VAC, 10A Slo Blo fuse for analog,
1A Slo Blo fuse for digital;
50-60 Hz.

80W @ Standby; 120W @ idle;
800W @ full power into 8 ohms;
1350W @ 4 ohms, 2100W @ 2 ohms.

5-12 VDC Pulse between 1 and 500mS.

8 13/16" W x 19 5/8" H x 23 5/8" D
(224 x 499 x 600 mm)

110 Lbs. Stand alone (41.05 Kg),
130 Lbs. Boxed with accessories (48.52 Kg)

Internal: 176° F (80° C)
Room: 131° F (55° C)

 
   

 

 

 

Specifications subject to change without prior notice.